Be an Air Bag

How to Replace one of Yours


Page 5a

Next Page

More Pictures

This photo shows the passenger side forward drive axle airbag, fender liner removed.

This is the lower mounting bar for the fender liner. Every bolt going into this bar broke. I am going to make a strap at each bolt location to go behind the mounting bar. and will two bolts, one above and one below the bar.

Check out the How To: Here

This is a shot of all the rear air bags. This makes it easy to see that with wheel removal every bag is easily accessed. No fancy tools required here. I used 3/4" open and box wrenches and socket wrenches on the mounting nuts, a 1 1/8 wrench on the nut at the air fitting for the drive and 1 1/2 on the air fitting nut on the tag. An 11/16 wrench worked to loosen the air fittings on the rear two bags and for the tee and compression nuts on the forward drive bag I used a 5/8" wrench on the compression nuts and to remove the tee, and a 3/4 to remove the 45 degree ell.


Next Page
Return to Home Page Prevost Owners Group - POG Mango Mike's